Corlar® Epoxies

Corlar Epoxies



Corlar® Epoxies are based on Axalta modified polyamide epoxy technology. These popular epoxies are highly durable, formulated for a wide variety of uses, and provide outstanding corrosion and chemical resistance. Corlar® Epoxies can be applied with brush, roller or spray, creating tough films that resist abrasions, solvents and chemicals. Many products in the Corlar® line are well-known for their surface tolerant and direct-to-metal capabilities.

Topcoats

Corlar® 2.8 HG™

High Gloss Epoxy

  • Provides additional protection to extend a topcoat’s color life
  • Highly durable coating delivers outstanding corrosion and chemical resistance
  • Smooth appearance with high gloss and custom color capability
  • Low temp application (as low as 40ºF (4.4ºC))

Primers

Corlar® LV SG™

Very High Solids Semi-Gloss Epoxy Mastic

  • Axalta amido amine cured epoxy technology
  • Very low VOC < 0.8 lbs
  • Delivers outstanding corrosion & chemical resistance
  • High build - up to 10 mil DFT per coat
  • Smooth appearance
  • Outstanding abrasion resistance and edge protection
  • Can be applied over marginal surface prep

Corlar® 2.1 PR-P™

High Solids Productive Epoxy Primer

  • Highly durable, very fast dry primer
  • Low temperature application / cure (as low as 35ºF (1.7ºC))
  • Smooth, sandable primer
  • Up to 5 mil DFT per coat
  • Two component (2K)

Corlar® 2.1 PR™

High Solids Epoxy Mastic Primer

  • Delivers superior corrosion & chemical resistance, abrasion resistance, and edge protection
  • Can be applied over marginally prepared surfaces
  • Low temperature application/cure (as low as 35ºF (1.7ºC))
  • Application over damp surfaces or high humidity
  • High Build - up to 6 mil DFT per coat
  • Color Mix Capability

Corlar® 2.8 PR™

High Solids Epoxy Primer

  • Highly durable coating delivers excellent corrosion and chemical resistance
  • No induction time and long pot life

Direct to Metal

Corlar® LV SG™

Very High Solids Semi-Gloss Epoxy Mastic

  • Axalta amido amine cured epoxy technology
  • Very low VOC < 0.8 lbs
  • Delivers outstanding corrosion & chemical resistance
  • High build - up to 10 mil DFT per coat
  • Smooth appearance
  • Outstanding abrasion resistance and edge protection
  • Can be applied over marginal surface prep

Corlar® 2.1 ST™

Satin High Solids Epoxy Mastic

  • Delivers superior corrosion & chemical resistance, abrasion resistance, and edge protection
  • Can be applied over marginally prepared surfaces
  • Low temperature application/cure (as low as 35ºF (1.7ºC))
  • Application over damp surfaces or high humidity
  • High Build - up to 6 mil DFT per coat
  • Color Mix Capability

Corlar® 2.1 HTA™

High Temperature Aluminum Epoxy Mastic

  • Same as Corlar® 2.1 PR™ with applications to high temp surfaces (450ºF (232ºC) continuous or 500ºF (260ºC) intermittent)

Corlar® 2.8 HG-D™

High Gloss, High Build Epoxy DTM

  • Single coat application up to 5 mils dry film thickness
  • Excellent resistance to chemicals
  • Low temp application (as low as 40ºF (4.4ºC))